Cloning the JVC IF-C01COMG card, Through-hole version!

Update: Find a full-sized version here: https://immerhax.com/?p=533

So, after I posted the previous board around the internet, some people were “frightened” by the small SMD components as it takes some skill and also some more precise soldering irons to deal with these. I thus decided to make a through-hole version which is much easier to solder by hand. OSHPark page here: https://www.oshpark.com/shared_projects/NHivAGjf

Compatible with the same input boards as the SMD version. Enjoy!

KiCad project here: https://github.com/skumlos/if-c01comg-clone-tht

This entry was posted on Thursday, July 5th, 2018 at 20:56 and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

One Response to “Cloning the JVC IF-C01COMG card, Through-hole version!”

  1. Cloning the JVC IF-C01COMG card « immerhax says:
    29/08/2020 at 18:50

    […] whatever hax I discover and need… « IKEA Dalskär aerator Cloning the JVC IF-C01COMG card, Through-hole version! » […]